WE ARE SUPPLIER & EXPORTER OF WEIGH PAD WEIGHING SYSTEM
|
| |
|
| |
| Pad Specifications: |
| |
- Rated capacity: up to 20 ton per pad @ 20 lb graduations
- Material: High strength aluminum alloy
- Static Accuracy: 0.25% full scale or better
- Dynamic Accuracy: +/- 1% of full scale with leveling track (See Weigh in Motion) ,
- Dynamic Accuracy: +/- 3% of full scale without leveling track
- Overload Capacity: 200% full scale
- Input/Output Resistance: 560 ohms +/- 50 ohms
- Output: 0.6 to 1.0 mV/V
- Excitation: 5 to 24 VDC
- Stability: 0.5% full scale/year
- Ground level Requirement: 5mm within 0-4m
- Weight: 52 lbs including ramps, 42 lbs without ramps
- Operating Temperature range: -10 to +55 deg C
|
| |
| Optional Leveling Track Specifications: |
| |
- Width: 24"
- Thickness: 3/4"
- Fit Style: Interlock Puzzle
- Section Weight: 20lbs
- Material: High density plastic/rubber compound
- Temperature Range: -40 deg C to +55 deg C
|
 |
|
| |
| Feature: |
| |
- High accuracy in dynamic weighing.
- Optional to input the monitoring organs, personnel, vehicle license No. and
Axle types.
- Input with ease the complete vehicle license No. along with the name of city
and province.
- Memorizing detection records of 1300 cars.
- Easy to operate with complete retrieval and statistical functions.
- AC/DC convertible; battery supply up to 40 hours for continual working; auto
shutoff.
- Battery voltage indication.,
- Detection data output to the computer.
- Simultaneously performing detection in both passages with high precision;
applicable to check out side overload.
- Capable of performing either duty of highway administration and traffic police.
- Applied in portable highway overload detection systems
|
| |
AXLE WEIGHBRIDGE |
| |
Axle weighbridges are a very good choice for Mines and Factories, where installations are required to be quick. Shifting axle weighbridge can be done quickly and needs only a small pickup truck for transportation.
Axle weigh bridges are very cost effective solution, the user benefits from the low equipment cost, low cost of civil work & installation and hence rapid recovery on investment.
Civil work takes only 3 to 4 days time and the installation can be done in just one day.
With it’s many advantages and cost benefits, axle weighbridge is highly rewarding solution with no compromise.
|
| |
|
| |
| SPECIAL FEATURE: |
| |
- Quick delivery and installation
- Low Cost
- Very low cost on civil work
- Installation in one day
- Powerful software (AXSOFT) which gives total control and accountability
- IP-68 protection for load cells
- System fully protected from lightening
- Rugged instrumentation to give seamless performance
- Capacity up to 60 Ton
|
| |
| INTRODUCTION AXLE WEIGHBRIDGE |
| |
The Single-Axle weighbridge is an accurate weighing system which will weigh any type of vehicle regardless of its length or the number of axles it has. As a vehicle moves across the platform at slow speed an electronic control computes and logs the weight of every axle. The heavy duty construction has been built to work in harsh conditions and is particularly suited to installations where high volumes of traffic are being weighed. |
| |
| CLOSE COUPLED AXLES |
| |
The platform has been specifically designed to take all combinations of axles. Single axles, tandem and tri-axle combinations are easily weighed because the electronics can capture the weights of every axle individually. Close coupled axles with spring or air suspension are no problem to the weighbridge which will take individual axles of up to 30 Ton each. |
 |
|
| |
| DYNAMIC WEIGHING |
In-motion (dynamic) weighing is an established feature of axle weighing . It is the basis of the Single Axle system and today with modern, state of the art electronic circuits it provides the highest accuracy for weighing individual axles. As a vehicle drives over the weighbridge in low gear the axles are
Automatically recorded on the move. The electronics calculates the actual weight of each axle as it passes over the platform and immediately displays the weight. Automatic operation of the weighbridge allows a driver to weigh without the need for a specialist operator to be present. A unique electronic zeroing system ensures that the correct weight is achieved for each axle and that zero adjustment between weighing is not required. |
 |
|
| LARGE DISPLAY |
| |
The weight of the axles can be shown on a large external display with 100 mm high white digits making the information visible to the driver immediately. At the end of the weighing the display will show the gross weight of the vehicle. The large display is fully waterproof in stainless steel housing. The display shows zero when the platform is idle and shows a row of dashes when an over speed is detected. |
 |
|
| TRAFFIC LIGHT |
A green traffic light shows that the platform is at zero and Indicates to the driver that the weighbridge is ready to drive over. If an over speed is detected the light immediately turns to red and stays red until the vehicle has left the weighbridge. When the traffic light is used in conjunction with the large display the function can be changed for vehicle control and is especially useful for law enforcement sites. |
 |
|
| |
| INSTALLATION PROCEDURE |
We recognize that sitting of a single axle weighbridge is of prime consideration and so we offer an advisory service for location, backed up by easy to follow instructions and technical
Assistance. There are two essential rules which must be followed when weighing axles, namely: a) the weighing platform must be recessed into the ground at a prepared site and b) the approach and exit to the weighing platform need to be level to the full length of the longest vehicle to be weighed. Accuracy will be compromised if the approach and exit roadways are not completely level within normal concreting tolerances. Use of our pit frame simplifies the construction and ensures that the weighbridge is located correctly. We guide for installation is a comprehensive manual which describes in detail the whole civil works operation. Our civil engineering team are able to give advice and we can also provide a complete turn-key package, undertaking all aspects of the installation and commissioning. |
|
| |
| MAINTENANCE |
Where the single axle weighbridge is to be used for law enforcement purposes We can train your staff in calibration, regular check-up procedures and maintenance schedules. We provide on-going support so that the equipment will give many years of trouble free service. It is designed with cost of maintenance in mind and has a record designed the first dynamic single axle weighbridge using strain gauge load cells for very low total cost of ownership. All products are committed to an extensive field assessment programme after development, both at pre-production and final production level which enables us to maintain our reputation of supplying equipment which will have a long and trouble free life. |
|
| |
| CONSTRUCTION |
The strength of the single axle weighbridge is the single piece welded platform. High quality steel beams form the superstructure and the platform deck is 10 millimeter flat plate to ensure optimum rigidity. The heavy duty construction and simplicity of design make the weighbridge which will last for many years. The four sensors which actually detect the weight on the platform are welded stainless steel load cells that have been for designed. The robust design gives high reliability, low maintenance and long service life, whilst still providing very high accuracy for the weighing function. An electronic controller takes the signals from the load cells and turns them into weights. This is done right there in the platform so that there is no distortion of the result because of long cable runs. The signal which is sent to the computer or terminal is digital and so is immune to interference of the type typically found in less advanced products.
A single low voltage cable comes from the platform to a terminal which may be a simple indicator or a sophisticated computer. Each has its merits according to the purpose of the weighbridge, but both are made to be robust and serve the purpose of weighing many vehicles quickly and easily. Traffic lights, large display and other ancillaries like vehicle transponders and traffic control barriers are controlled from the terminal so that the weighing function is separate from the display and reporting functions. |
 |
|
| |
| SPECIFICATIONS |
Maximum axle weight |
: |
30 Ton |
Maximum gross weight of vehicle |
: |
100 Ton |
Static accuracy |
: |
+/- 20 kg. |
Dynamic accuracy per axle or +/- 1% whichever is |
: |
lesser. |
Indicator resolution |
: |
10 kg. |
Speed of operation |
: |
up to 10 km/hr (max) |
Recommended |
: |
3 to 5 km/hr. |
Power requirements |
: |
230 v ac; 50 hz. |
Platform dimensions |
: |
3.0 x 0.7 x 0.2 m. |
Platform type |
: |
welded construction, mild steel epoxy coated. |
Load Cells |
: |
10/15 Ton capacity each, stainless steel, Sealed
to IP68.
|
Electronics |
: |
Microprocessor weighing control sealed to IP68. |
Approach and exit roadways |
: |
20 meters (min). |
Operating temperature range |
: |
-10 degree to +60 degree |
| |
|
|
| |
|
|
|
| |
 |
| |
+919825467192
